The All-in-One Fiber Optic Identifier with Optical Power Meter and Red Light Source is an essential tool for fiber optic maintenance. It enables non-destructive fiber identification, precisely measures optical power loss(via built-in power meter), and verifies fiber continuity(using a 650nm red light source). Compatible with both single-mode and multi-mode fibers, it allows live fiber testing without service interruption by detecting modulated signals(1310/1550nm wavelengths with 270Hz/1KHz/2KHz tones)injected at the fiber end. This ensures accurate tracing and isolation of target fibers during installation, maintenance, or troubleshooting in complex optical networks.
Features
Digital display of relative power
Online testing without interrupting the light source
Detects modulated signals at 270Hz, 1000Hz and 2000Hz.
Combines functions: optical power meter, red light source, fiber tracing and network cable testing.
Battery level indicator for real-time monitoring of remaining power
4-in-1 universal clamp for online testing without replacement, ensuring zero damage to fiber optics.
Specifications
Type | Parameter |
Wavelength range | 800-1700nm |
Signal recognition type | CW, 270Hz±5%, 1000Hz±5%, 2000Hz±5% |
Detector Type | φ1mm, InGaAs |
Adapt to fiber optic types | General φ0.25(Bare fiber), φ0.9, φ2.0, φ3.0 fiber optic jumper |
Signal direction | Directional arrows left and right are shown on the display |
Optical power reading range | -40dBm - +10dBm |
Optical power testing range | -70dBm - +10dBm(±0.2dB) |
Optical power test wavelength | 850nm-1650nm |
Signal frequency range | 270Hz, 1000Hz, 2000Hz |
Red light test wavelength | 650nm |
Red light output wavelength | >30mW |
Battery type | Battery version: 2xAA batteries(1.5V) Charging version: Polymer battery 800mAh(3.7V) |
Operation temperature(℃) | -10 - +60℃ |
Size | 243*50*50mm |
Weight | 177g |
Copyright (C) 2022-2023 Nanjing Future Fiber Solutions Co., Ltd All Rights Reserved XML
